PureGreen24 Disinfectant - Deodorizer / 1 Gallon
PureGreen24 Disinfectant & Deodorizer is an EPA-registered, ready-to-use antimicrobial product designed for disinfection of hard, nonporous, non-food-contact surfaces. Formulated with silver ions and citric acid, it provides professional salons, spas, barbershops, gyms, and other facilities with a practical option for routine surface disinfection and deodorizing when used according to the product label.
Professional Surface Disinfection
PureGreen24 is intended for use on hard, nonporous surfaces such as counters, chairs, treatment-area surfaces, equipment exteriors, doorknobs, and other labeled surfaces. For effective disinfection, surfaces must be pre-cleaned and then kept visibly wet with PureGreen24 for the full contact time required for the specific organism listed on the stocked product label.
Contact Time Matters
Different microorganisms require different wet contact times. Do not assume a brief spray provides complete disinfection. Pre-clean the surface, apply enough PureGreen24 to completely wet the area, and maintain visible wetness for the full organism-specific contact time stated on the product label before allowing the surface to dry or wiping away excess.
Important: Always follow the contact time on the physical label of the product in use. A shorter application time may not control every organism listed on the label.
Key Features
- EPA-registered broad-spectrum disinfectant and deodorizer
- Ready-to-use formula; no mixing or dilution required
- Formulated with silver ions and citric acid
- Designed for hard, nonporous, non-food-contact surfaces
- Suitable for professional environments including salons, spas, barbershops, gyms, and treatment areas
- Colorless and odorless
- Can be applied with a spray bottle and clean microfiber cloth
- Manufactured in the USA
How to Use
- Pre-clean the surface before disinfection. PureGreen24 may be used for the pre-cleaning step when appropriate.
- Apply PureGreen24 to the hard, nonporous surface until the area is completely and visibly wet.
- Use a clean microfiber cloth or towel to distribute the product evenly if needed.
- Keep the surface visibly wet for the full contact time specified on the stocked product label for the organism being targeted.
- After the required contact time, allow the surface to air dry or wipe away excess with a clean towel as permitted by the label.
No-Rinse Use
When used according to label directions, PureGreen24 does not require rinsing on labeled hard, nonporous, non-food-contact surfaces. If excess product leaves a tacky residue, wipe the surface dry after the required contact time. For food-contact surfaces or other applications not specifically covered by the label, follow the applicable product-label directions.
Application Tips
For irregularly shaped items, spray PureGreen24 onto a microfiber cloth until the cloth is thoroughly damp, then wipe the surface to ensure even coverage. For larger surfaces, apply enough product to maintain complete wetness for the required contact time before drying or wiping excess.
Important Use Guidance
Do not rely on claims of continuous 24-hour protection as a reason to reduce normal cleaning or disinfection frequency. Reapply PureGreen24 according to the product label and your facility’s sanitation procedures, including after surfaces are cleaned or otherwise require re-disinfection.
