Andis Cool Care Plus / 15.5 oz.
Keep clipper and trimmer blades clean, cool, lubricated, and protected with Andis Cool Care Plus. This professional 5-in-1 aerosol combines disinfectant, coolant, lubricant, cleaner, and rust-prevention benefits in one convenient blade-care product for busy barber, salon, grooming, and professional environments.
5-in-1 Professional Blade Care
Andis Cool Care Plus is designed to help maintain clipper and trimmer blades between and after services. The high-pressure aerosol helps remove loose hair and debris from blade teeth while the formula cools, cleans, lightly lubricates, disinfects, and helps protect against rust.
Important Disinfection Directions
For disinfection, first clean the blade to remove visible debris. Switch the clipper or trimmer off, then spray the blade thoroughly so the treated surfaces remain visibly wet for 10 minutes. Allow the blade to air dry before returning the tool to service. Follow the complete manufacturer label directions for proper disinfection.
Important: A brief cooling spray between cuts or services may help cool and maintain the blade, but it does not replace the full 10-minute wet-contact time required for disinfection.
Key Features
- 5-in-1 formula: disinfects, cools, lubricates, cleans, and helps prevent rust
- High-pressure spray helps remove loose hair and debris from blade teeth
- Provides fast blade cooling during professional use
- Helps maintain and protect clipper and trimmer blades
- Convenient aerosol application for professional workstations
For Routine Blade Maintenance
Cool Care Plus can be used as part of regular clipper and trimmer maintenance to help reduce blade heat, clear loose debris, provide light lubrication, and protect blades against corrosion. Andis also recommends regular blade oiling; Cool Care Plus does not replace dedicated clipper oil for ongoing blade lubrication and maintenance.
How to Use for Disinfection
- Remove visible hair and debris from the blade.
- Switch the clipper or trimmer off.
- Spray the blade thoroughly according to the product label.
- Keep treated blade surfaces visibly wet for 10 minutes.
- Allow the blade to air dry before reuse.
Always follow the complete directions and precautions on the manufacturer’s label.
